AIR SYSTEM PREVENTATIVE MAINTENANCE:
1. Water in the compressor tank will cause serious corrosion to your air tools and should be
drained daily to avoid excessive water in your air supply. Dirty wet air will rapidly shorten the
life of your air tools.
2. Supply tool with 90 psi (6.2 bar) of clean, dry air. Higher pressure drastically reduces tool life.
3. Prevent contaminates from entering the air motor.
4. Every day before use, remove the tool from air line and pour 20 cc suitable motor lubricating
oil into Air Inlet. Run the tool for few seconds to allow air to circulate the oil and well lubricate
the cylinder. This will ensure top performance and maximum durability of tool.
5. Lubrication : Use an air line lubricator with SAE#10 oil, adjusted to 2 ~ 3 drops per minute. If
an air line lubricator can not be used, add air motor oil to the inlet before and after use. Gears,
bearing, sleeves, and sliders need to be lubricated as well.
6. Dissemble and inspect air motor and governor assembly every 3 months if the tool is used
every day. Replace damaged or worn parts.
7. Use original factory supplied tools, spare parts and accessories.
Do not alter or modify the unit from the Original design or function.